Used Machinery

ALL Used Machinery

Used Air Compressors

Used Autobrakes / Sheet Metal Folders

Used Bar Folders

Used Sheet Metal Brakes

Used Cheek Benders

Used Cleat Benders / Cleat Folders

Used Clincher / Fasteners

Used Coil Lines

Used Corner Inserter Machines

Used Crimping / Beading / Rotary Machine

Used Drill Press

Used Duct Beading Machine

Used Duct Insulation Liner Cutters

Used Flangers / Flanging Machines

Used Gorelockers / Elbow Machines

Used Grinders

Used HVAC Accessories

Used HVAC Duct Insulation Pin Spotters

Used Ironworkers

Used Laser Cutting Machines

Used Notching Machines

Used Pipe Equipment

Used Pittsburgh Seamers

Used Plasma Cutting Machines

Used Press Brakes

Used Punching Machines

Used Sheet Metal Rolls

Used Roll Formers

Used Saws

Used Sheet Metal Shears

Used Sheet Metal Slitters

Used Spiral Machines

Used Welders

sheet metal flanging machines

Tin Knocker TK No. 16 Power Flanger

A perfect partner for the TK 16-gauge Pittsburg Roll Former
Puts a 3/8" outside flange on straight or curved sheet metal edges
Puts a flange on material with a diameter of as little as 2"

TK No. 16 Power Flanger Specifications:
Weight: 635 lbs
Dimensions: 36 x 28 x 48 in
Capacity: 16 Gauge Aluminum, Copper, Stainless Steel and Brass
Motor: 0.75 HP, 110V, Single Phase
Speed: Approx. 18' Per Minute
UPS: UPS Capable

Return to TOP

Tin Knocker TK No. 20 Power Flanger

This power flanger has the “auto-guide” feature, which automatically controls the forming of a right-angle flange. It will contour and follow any edge, straight or curved. Using the convenient table slot, the operator merely turns up a starting edge, starts the material through the rolls and lets go. This machine comes with a stand.

*Includes Stand

TK No. 20 Power Flanger Specifications:
Weight: 207 lbs
Dimensions: 25 x 25 x 41 in
Capacity: 20 Ga. and Lighter
Electrics: 115V/ 1 PH
Stand Is Included

Return to TOP

Tin Knocker TK Manual Flanger

Puts 7/32" flange on elbows and other radius fittings. Bench mounted, there is no gauge to set, and requires no special tools.

TK Manual Flanger Specifications:
Capacity: 20 Ga x 7/32"
Minimum Radius: 1 3/4"
UPS: UPS Capable
Dimensions: 26"x16"x12"
Weight: 35 lbs

Return to TOP

Tin Knocker 20 & 24 Ga Flanging Attachment

Add this option to turn up a 3/16 flange on straight or contoured sheet metal.

Return to TOP

Lockformer Auto - Guide Flanger 16-18

This Lockformer power flanger has the "auto-guide" feature, which automatically controls the forming of a right-angle flange. This Lockformer auto - guide flanger model 16-18 will contour and follow any edge, straight or curved. Using the convenient table slot, the operator merely turns up a starting edge, starts the material through the rolls and lets go. A calibrated dial sets the auto-guide for work with radii as small as 3-1/4". Two flange heights are available for this flanging machine - please specify 3/8" or 1/4".

Specifications for the Lockformer Auto - Guide Flanger :

• 16 gauge maximum , Working range 16-24
• 2 flange heights available, 3/8" or 1/4"
• 18 feet per minute

Return To TOP

Eagle Morlin Model 1300 Handy Flanger

This Eagle Morlin Flanging machine is precision crafted for effortless operation. Super heavy duty construction to last for years. Simply clamp your Eagle Morlin Handy Flanger to any work surface and it's ready to use.

Specifications of Eagle Morlins handy flanger model 1300:

• Capacity: 20 gauge or lighter
• Makes a perfect 7/32 flange, even on radius fittings.
• Weight : Approximately 27 lbs.

Return To TOP

Flagler 16 Gauge Power Flanger

This Flagler Power flanging machine is ideal for larger fitting work. This Flagler Power flanging machine is built with a heavy duty cast iron gear housing with oil bath.

Specifications for this Flagler 16 Gauge Power Flanger :

• Capacity: 16-20 Ga.
• Height of Flange: 3/8"
• Speed: Approx. 18 feet per minute
• Motor: 3/4 HP 115/1/60/1800 RPM .
• Drive: Vee Belt.
• Base: Arc Welded Steel. heavy Top Plate
• Dimensions: 24" long, 24" wide, 38 5/8". Feed Table Height 34 5/8"
• Shipping Weight: Approximately 185 pounds

Return To TOP

Flagler Model 20 Power Flanger

Stand alone flanger to allow shops to free up their flanging attachment on their Pittsburgh machine, complete with flange follower.

Specifications For Model 20 Power Flanger:

Capacity: 20 Ga. and Lighter
Height of Flange: 7/32”
Speed: Approx. 25 feet per minute
Motor:1/2 HP 115/1/60/1800 RPM
Drive: Chain Drive
Base: Arc Welded Steel. heavy Top Plate
Dimensions: 24" long, 24" wide, 38 5/8"
Feed Table Height 34 5/8"
Shipping Weight: Approximately 150 pounds

Return to TOP

Return to the New Machinery Page

Return to the Home Page