CINCINNATI Precision Machinery - sheet metal fabrication machinery specialists...we are here to serve you for all of your sheet metal fabricating machinery Here at CPM we represent machinery for all of your sheet metal fabrication needs - everything from hand tools to lasers, coilines to brakes, notchers to ironworkers and much more. Please give us a call or glance through CINCINNATI Precision Machinery 's site for all your sheet metal fabrication needs.
 
 
 
 
 
 
 

  

 

Used Machinery

ALL Used Machinery

Used Air Compressors

Used Autobrakes / Sheet Metal Folders


Used Bar Folders

Used Sheet Metal Brakes

Used Cheek Benders

Used Cleat Benders / Cleat Folders

Used Clincher / Fasteners

Used Coil Lines

Used Corner Inserter Machines

Used Crimping / Beading / Rotary Machine

Used Drill Press

Used Duct Beading Machine

Used Duct Insulation Liner Cutters

Used Flangers / Flanging Machines

Used Gorelockers / Elbow Machines

Used Grinders

Used HVAC Accessories

Used HVAC Duct Insulation Pin Spotters

Used Ironworkers

Used Laser Cutting Machines

Used Notching Machines

Used Pipe Equipment

Used Pittsburgh Seamers

Used Plasma Cutting Machines

Used Press Brakes

Used Punching Machines

Used Sheet Metal Rolls

Used Roll Formers

Used Saws

Used Sheet Metal Shears

Used Sheet Metal Slitters

Used Spiral Machines

Used Welders

 

 

Used Spiral Machines

A spiral duct machine produces straight round spiral ducts and is mostly applied in the HVAC industry. It is an automated system for producing rigid spiral metal pipe from 4 inches (100 mm) in diameter up to 108 inches (2,743 mm) in diameter. This versatile machine enables you to manufacture pipe from a variety of materials including aluminum and galvanized steel up to 14 gauge (2.0 mm) and stainless steel up to 18 gauge (1.2 mm).

Our inventory is continually being updated, if you do not see what you are looking for please call our office, a salesperson will be happy to assist in finding the right new or used machinery for your shop needs. CINCINNATI Precision Machinery 513-860-4133.

 

Spiro Spiral Tubeformer with Slitter Cutoff - Model 600

See More Pictures and Video: Used Spiro Spiral Tubeformer

 

Price - $40,000.00

Item #SPI-1653

  • Manufacturer: Spiro
  • Model: 600
  • Condition: Used - Good
  • Vertical Decoiler
  • 2 - 10' Run-off Tables
  • Form Roll Units - #1, #2 and #3 (20 gauge - 28 gauge)
  • Forming Heads (one of each of the following sizes) - 4", 6", 8", 10", 12", 12", 14", 16", 18", 20", 22" and 24"
  • With Slitter Cut-off
  • Weight and Dimensions:
    • 1 - Spiro model 600 Tubeformer and with 3 roll units - 61" X 68" X 58" high and weighs 3,070 lbs.
    • 1 - Decoiler and transfer table - 55" X 68" X 62" high and weighs 816 lbs.
    • 2 - Run off tables - 40" X 106" X 42" high and weigh 332 lbs EACH
    • 1 - Decoiler Track - 32" X 112" X 2" and weighs 88 lbs
    • 1 - Pallet of forming heads 4" - 24" (even sizes) 32" X 32" X 30" high and weighs 292 lbs.
  • Location: Offsite

 

 

Return to TOP

Return to USED SHEET METAL MACHINERY Page


cincinnati precision machinery