Tin Knocker TK
16 Ga Pitts Pittsburgh Roll Forming Machine
The 16 gauge Pittsburgh Lock machine comes loaded
with 7 forming stations with 2 forming positions. One position
forms the Pittsburgh Lock, while the outboard position has the
ability of forming a number of other profiles, to include: Acme
Pipe Lock, Drive Cleat or 4 in 1 rolls (3/16” Right Angle
Flange, 7/16” Right Angle Flange, Standing Seam and T-Connection.
You don’t pay extra for the choice of opposing rolls, either.
You get your choice of rolls opposite the Pittsburgh rolls.
Tk 16 Ga Pittsburgh Specifications:
Capacity: 16-20 Ga. Uses Approx. 1-3/8” of material
Motor: 3HP,
Electrics: 230/3/60, (1PH Optional)
Depth of Pocket/Size: ½” width of hammer-over edge
adjustable up to 3/8
Speed: 40-45 ft per minute
Tin Knocker
TK 20 Ga Pitts Pittsburgh Roll Forming Machine with Optional
Flanger
This 5 station 20 Gauge Pittsburgh lock roll
former is offered with choice of Drive Cleat or Acme rolls on
the other outboard side. Powered by a 1 HP motor with V-belt
drive
**Optional Flanging Attachment
TK 20 Ga Pittsburgh Specifications:
Weight: 360 lbs.
Dimensions: 40"L x 24"W x 44"H
Capacity: 20-26 Gauge Mild Steel
Motor: 1 HP, 1800 RPM
Electrics: 115/230 Volt
Depth of Pocket: 5/16"
Speed: Approx. 25 FPM
Tin Knocker
TK 24 GA Pitts Pittsburgh Roll Forming Machine With Stand &
Optional Flanger
Portable rollformer for 24 gauge and lighter
material. It is available with power flanging attachment and
is perfect for field use. Includes an all steel stand.
**Shown With Optional Flanger
TK 24 Ga Pittsburgh Specifications:
Capacity: 24 Gauge Mild Steel
Motor: 1/2 HP, 1700 RPM
Electrics: 115 Volt, Single Phase, 60 Hz - Standard (230V/1/50
available)
Depth of Pocket: Approx. 5/16" with hammer edge of 3/8"
Speed: Approx. 35 FPM
Flange Height: 3/16"
Dimensions Roll Former: 30" x 14" x 20"
Dimensions Stand: 35" x 14" x 24" add 6"
around for shipping
Shipping Dimensions: 41" x 25" x 30" Weight: Rollformer: 305 lbs Note: When shipping, rollformer
will fit inside stand
Compact and light enough to be taken right to the
job, yet cost-effective enough to be a stand-by machine for your
shop, this machine is built to deliver heavy-duty service. Ideal
for 24 gauge materials or lighter. Place it on a bench, plug it
in, and it’s ready to produce.
Auto-Guide Power Flanging Attachment
For Pittsburgh Lock Models 20 & 24
Auto-Guide will automatically follow any edge — straight,
inner or outer radii — and no changeover is necessary between
Pittsburgh Lock and flanging operations. Automatically handles
radii down to 3-1/4". Lock out the automatic feature to run
a radius down to 1-3/8". Two Auto-Guide Power Flanging Attachment
models are available, one for Model 24 and one for Model 20.
CAPACITY : 24-28 Gauge --Uses approximately 1" of material
DEPTH OF POCKET/SIZE :5/16" Width of hammer-over edge
adjustable up to 3/8"
SPEED : 30-35 feet per minute
Options : Optional auto-guide power flanging attachment
Lockformer
Pittsburgh Lock Model 20 & Pittsburgh Lock Model 20 Super
Speed
In 1937, Lockformer introduced the first truly practical lock
forming machine. It significantly cut the time required for making
duct and it completely revolutionized the sheet metal working
industry.
Note: Model 20 Super Speed is not available
with the optional flanging attachment.
Capacity : 20-26 Gauge Uses approximately 1" of material
DEPTH OF POCKET/SIZE : 5/16" Width of hammer-over edge
adjustable up to 3/8" , Extended shafts for mounting auxiliary
rolls
SPEED : Pittsburgh Lock Model 20 - 25 feet per minute , Pittsburgh
Lock Model 20 Super Speed - 75 feet per minute
These powerful performers offer the HVAC industry day-in/day-out
service. The 14, 16 and 18 gauge Pittsburgh rollforming machines
have 7 forming stations with two forming positions. One inboard
position forms the Pittsburgh lock, and one auxiliary or outboard
position has the capability of forming 1 of 8 different profiles
depending on which auxiliary roll set is ordered (See below for
list of outboard-mounted auxiliary roll sets). The forming speeds
for the individual machines are listed in the chart below.
Pittsburgh Lock Model 14
CAPACITY : 14-18 Gauge Uses approximately 1-3/8" of material
DEPTH OF POCKET/SIZE : 1/2" Width of hammer-over edge
adjustable up to 3/8", Extended shafts for mounting auxiliary
rolls
SPEED : 35 feet per minute
Pittsburgh Lock Model 16
CAPACITY : 16-20 Gauge Uses approximately 1-3/8" of material
DEPTH OF POCKET/SIZE : 1/2" Width of hammer-over edge
adjustable up to 3/8"Extended shafts for mounting auxiliary
rolls
SPEED : 40-45 feet per minute
Pittsburgh Lock Model 18
CAPACITY : 18-22 Gauge Uses approximately 1-1/8" of
material
DEPTH OF POCKET/SIZE : 3/8" Width of hammer-over edge
adjustable up to 3/8"Extended shafts for mounting auxiliary
rolls
Engel's HB-800P Rollformer is equipped
with built in Pittsburgh Lock Rolls for
16-20 gauge capacity, equipped with Pittsburgh Lock Rolls, with
extended shaft for mounting
auxiliary rolls, one side outboard only. Note: No opening
rolls on eight (8) station Pittsburgh
tooling. No inboard tooling.
Features:
• Optional electrics available including single phase for
job site applications
• Hardened steel in-feed guide to handle rough plasma cut
edges
• All units have eight (8) forming stations with tooling
mounted on turned, ground and polished 1” spindles
• Extra large bearings with inner races
Specifications:
Forming Stations……………………………………………………………………8
Capacity ……………………………..………………………………….16-20
Gauge
Depth of Pocket..…………………………………………1/2”
W/ ½” Hammer Over
Forming Speed………………………………………………………………90
FPM
Drive………………………………………………………………………..…V
Belt
Motor……………………………………………………………….5
HP/1800 RPM
Electrics………………………………………………………..200-230
or 460/3 PH
Dimensions…………………………………………...…24”
W x 60” L x 33-1/2” H
Pass Height……………………………………………………………………33-1/2”
Ship Weight…………………………………………………………………950
Lbs.
Models available for Pittsburgh lock , pitts lock Roll forming
Machines
**Optional Flanging Attachment
