Used Sheet Metal Machinery For Sale

Used Ingersoll Rand U15H-SP Rotary Screw Air Compressor

Price - $2,000.00

Item #1332

• Manufacturer: Ingersoll Rand
• Model: U15H-SP
• Serial No: K3606U86
• Capacities: 15 HP, 125 PSI, 39 CFM
• Electrics: 200 V/ 3 PH
• No Tank Required
• 3500 Hours on Meter
• Quiet Continuous Run
• Approx. MFG. Date: 1986
• Approx. New List Price: $9,000.00
• Location: CPM Warehouse

Return to TOP

Used Quincy Air Compressor - Model QE 7.5

Price - $500.00

Item #1503

• Manufacturer: Quincy
• Model: QE 7.5
• Capacities: 15 HP, 125 PSI, 39 CFM
• Electrics: 208 - 230/ 460
• 80 Gallon Tank
• Max - 200 PSI
• Motor: 7.5 HP Baldor Motor
• Includes QE Series Instruction & Parts Manual
• Cast Iron, Rugged Design For Industrial Shop use
• Approx. Weight: 650 LBS
• Approx. New List Price: $2,500.00
• Location: CPM Warehouse

Return to TOP

We Currently Do Not Have Any Used Autobrakes / CIDAN Folders. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Autobrake / CIDAN Folder.

Return to TOP

We Currently Do Not Have Any Used Bar Folders. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Bar Folder.

Return to TOP

Used Tennsmith Floor Model 10' X 18 Ga Sheet Metal Leaf Brake - Model 1018

Price - $4,500.00

Item # 1548

• Manufacturer: Tennsmith
• Model: 1018
• Capacities: 10' X 18 Ga Mild Steel
• Sheet Metal Manual Brake For HVAC and Roofing Applications, and More
• Approx. Weight: 2,000 LBS
• Approx. New List Price: $4,000.00
• Location: OFFSITE

**NOTE: AVAILABLE SOON

Return to Top

We Currently Do Not Have Any Used Cheek Benders. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Cheek Bender.

Return to TOP

We Currently Do Not Have Any Used Cleat Benders. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Cleat Bender.

Return to TOP

We Currently Do Not Have Any Used Powered Cleat Folders. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Powered Cleat Folders.

Return to TOP

We Currently Do Not Have Any Used Clinchers / Fasteners. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Clincher / Fastener.

Return to TOP

Used Vicon Machinery 5’ Shear & Bend Coil Line

SOLD

Item #1507LM

• Manufacturer: Vicon
• Approx. Mfg Date: 2009
• Electrics: 230v/440v/3PH - Wired For 230V
• Decoilers: 4 - 12,000LB 60” Capacity Decoilers - Underfed
• Two Additional Coil Spool Holders
• Hydraulic Coil Drive Unit
• Roller Tracking Guide System for Coil Feed
• 18 ga. Capacity Straightener, Beader,
  Hydraulic Notching for TDX and S&Drive
• 16 ga. Mild Steel Shear/Brake with 4 sided blades
  Brake has the option to bend Male Snaplock and/or Male Pittsburgh
• Dual Head S&Drive Cleat Edge Former (Unit installed between the notcher and the shear)
• Minimum Cleat Edge is 4”
• Vicon Computer Control System with Cabinet
• Approx. New List Price - $230,000.00
• Location: OFFSITE
  

Return to TOP

Used Engel 5’ HVAC Coil Line

SOLD

Item #1512

• Manufacturer: Engel
• Approx. Mfg Date: 2000
• Capacity: 16 - 18 Ga
• Electrics: 230v/480v/3PH - Wired For 480V
• Decoilers: 4 - 5' Underfed, 10,000 Lbs. Capacity
• 4 Extra Decoilers / Spools
• Shear, Notch, Bead
• Snaplock / Pittsburgh Rollformer Transfer System
• Dual Head Cleatformer FOr "S" & Drive
• Dual Head TDF Rollformer
• Full Wrap Brake
• No Insulation
• Requires Aire
• Currently Available For Demo
• Available In Spring When New Coiline Arrives
• Weight: By Section
• Approx. New List Price - $600,000.00
• Location: OFFSITE
  

Return to TOP

We Currently Do Not Have Any Used Crimping/Beading/Rotary Machines. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Crimper/Beaderer/Rotary Machine.

Return to TOP

We Currently Do Not Have Any Used Drill Presses. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Drill Press.

Return to TOP

We Currently Do Not Have Any Used Duct Beaders. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Duct Beading Machine.

Return to TOP

Used Engel & Duro Dyne Automatic Insulation Line

More Details: Used Engel / Duro Dyne Insulation Line

Price - $50,000.00

Item # MNG530

• Manufacturer: Engel
• Model: LM-60-DD - Engel Lin-O-Matic Duct Insulation System
• Capacities: 5' Duct (60")
• The Lin-O-Matic System Will Automatically Decoil, Cut-Co-Length And Apply Insulation To The Duct With Adhesive And Fasteners.
• Application Sizes Are 48" (1220mm) And 60" (1524mm) Duct Liner.
• This Machine Was Designed To Run From An E - 2000 Windows Based Controller
• Additional Equipment Included: Pump Is 40-80psi, ADH Valve 50-70psi, Pins Brake/Clutch 60-80psi, Shear 40-80psi

• Manufacturer: Duro - Dyne
• Model: FGMH - Duro-Dyne Multihead Pinspotter
• Air Is Required (600 volt/30 amp)
• Electrics: 440/3/60hz(Engel)
• Approx. MFG Date: 2002

• Approx. New List Price: $105,000.00
• Location: Offsite

Return to TOP

We Currently Do Not Have Any Used Flangers. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Flanger.

Return to TOP

Used Drossbach Gore Locker Machines

#1508 & #1509

More Details: Used Drossbach Gore Locker Machines

Price - $20,000.00
(Both Machines)

Item#1508 & #1509

• Manufacturer: Drossbach
• Model : SGB 1250
• Sheet Metal Gorelocking Machines
• Electrics : 230V / 3 PH
• Capacities: 18 Ga. galvanized
• 5" To 50" Formed Pieces
• Two Gorelocker Machines - SOLD TOGETHER
• To Form Elbows For Spiral Pipe - Gored Elbows
• One Machine Puts the Flange On, The Other Machine Closes The Seam Together
• Manuals Included
• Swing Away Table On Both Machines
• ALL Tooling (for each machine) Included:
  • 2 Pair Arms NW 125-800 / NW 500-1250mm
  • 3 Flange Wheels For A Flange Height of 5 / 7.5 / 10mm
  • 3 Gore Locking Wheels For A Flange Height Of 5 / 7.5 / 10mm
  • 1 Fixed Wheel
  • 2 Support Rollers
  • 1 Support
• Approx. Weight: 1,000 LBS. Each
• Approx. New list price : $70,000.00
• Location : CPM warehouse

Return to TOP

We Currently Do Not Have Any Used Sheet Metal Grinders. Please Check Back Or Contact Us And Our
Sales Staff Can Assist You In Finding A Used Sheet Metal Grinder.

Return to TOP

We Currently Do Not Have Any Used HVAC Accessories. Please Check Back Or Contact Us And Our
Sales Staff Can Assist You In Finding Used HVAC Accessories.

Return To TOP

We Currently Do Not Have Any Used Pin Spotters. Please Check Back Or Contact Us And Our
Sales Staff Can Assist You In Finding Used Pin Spotters.

Return To TOP

Used Pexto Angle Iron Combo Manual Ironworker

Price - $1,500.00

Item #1514

Return to TOP

We Currently Do Not Have Any Used Laser Cutting Machines. Please Check Back Or Contact Us And Our
Sales Staff Can Assist You In Finding A Used Laser Cutting Machine.

Return To TOP

We Currently Do Not Have Any Used Mechanical Piping Equipment. Please Check Back Or Contact Us And Our
Sales Staff Can Assist You In Finding Used Mechanical Piping Equipment.

Return To TOP

Used Engel Air Powered Sheet Metal Duct Notching Machine - Model 10LM-AP

Price - $4,000.00

Item # 1375

• Manufacturer: Engel
• Model: 10LM-AP
• 5 Heads For Full Wrapped Duct Or "L" Shaped Ductwork
• Capacities: 10' X 18 Gauge Mild Steel
• Electrics: 110V/1 PH
• Pneumatic/Air Powered
• Residential Notch Pattern
• Approx. Dims: 144"L X 52"W X 52"H
• Approx. Weight: 1,875 LBS.
• Approx. New List Price: $11,000.00
• Location: CPM Warehouse

Return to Top

Used L-Tec Hand Held Plasma - Model: PCM-1000I

Price - $700.00

Item # 1398

• Manufacturer: L-Tec
• Model: PCM-1000I
• Electrics: 480V / 3PH, 60 HZ
• Capacities: 1" Plus Material Thickness
• 15-70 Amp
• 24' Lead
• Dimensions: 24"W X 8"H X 31"L
• Approx. Weight: 150 LBS
• Approx. New List Price: $3,000.00
• Location: CPM Warehouse

Return to TOP

We Currently Do Not Have Any Used Press Brakes. Please Check Back Or Contact Us And Our
Sales Staff Can Assist You In Finding Used Press Brakest.

Return To TOP

We Currently Do Not Have Any Used Punching Machines. Please Check Back Or Contact Us And Our
Sales Staff Can Assist You In Finding A Used Punch Machine.

Return To TOP

Used Pexto / Roper Whitney 4' X 16 Ga Sheet Metal Roll w/ Power Converter

Price - $3,500.00

Item # 1539

• Manufacturer: Pexto / Roper Whitney
• Model: 416
• Sheet Metal Rolling Machine
• Capacities: 4' X 16-18 Ga
• Electrics: 110V
• Power Converter
• 3" Roll Diameter
• Wiring Grooves 3/8", 1/2", 5/8"
• Heavy Duty Welded Floor Stand
• Seperate Power Unit - Can be used w/ power or Manually
• Approx. New List Price: $7,000.00
• Location: CPM Warehouse

Return to TOP

Used Lockformer 18Ga Pittsburgh Roll Former

More Details: Used Lockformer Pittsburgh Roll Former

Price - $5,500.00

Item #1530

• Manufacturer: Lockformer
• Electrics: 230V / 3 PH
• capacities: 18 ga
• Female Pittsburgh Rolls
• Open on Other Side
• approx. dimensions: 60" x 24" x 41"
• approx. weight: 750 lbs
• approx. new list price: $11,100.00
• Location: CPM Warehouse

Return to TOP

Used Lockformer 20Ga Pittsburgh Roll Former

Video & More Details: Used Lockformer 20Ga Pittsburgh Roll Former

Price - $3,500.00

Item #1536

• Manufacturer: Lockformer
• Model 20 Rollformer
• Electrics: 230V / 3 PH
• capacities: 20 ga
• Male & Female Pittsburgh Rolls
• approx. dimensions: 48" x 24" x 42"
• approx. weight: 450 lbs
• approx. new list price: $6,000.00
• Location: CPM Warehouse

Return to TOP

Used Tomet Cold Saw - Model T315

PRICE - $3,000.00

Item # 1313

• Manufacturer: Tomet
• Serial No: XA13-128
• Capacities: Current Customer Cut
  • 16 & 14 Ga SS
• Up To 3" Diameter Tubing
• Electrics: 230 V / 3 Phase
• Saw Blade: 12" Max
• Optional Gauge Bars Included For Multiple Cuts
• Includes Extra Blades:
  • 2 - 12" Blades
  • 2 - 8 1/2" Blades
  • 3 - 9 1/2 " Blades
• Capacity at 90 Degrees:
  • Round Tube: 4 7/8"
  • Square Tube: 4 1/2" X 4 1/2"
  • Rectangle Tube: 5 1/2" X 4"
  • Round Solid: 2"
  • Square Solid: 2" X 2"
• Capacity at 45 degrees:
  • Round Tube: 4 3/8"
  • Square Tube: 4"
  • Rectangle Tube: 4" x 4"
  • Round Solid: 1 3/4"
  • Square Solid: 1 3/4" X 1 3/4"
• On Swivel Base & Stand
• Approx. Weight: 330 LBS.
• Approx. MFG Date: 1996
• Approx. New List Price w/ 4 Blades: $6,000.00
• Location: CPM Warehouse

Return to TOP

Used 24" Sheet Metal Bandsaw - Model A24F

Price - $3,000.00

Item # 1358

• Manufacturer: Connecticut
• Model: A24F Vertical Bandsaw
• Electrics: 230v - 460V/3PH 13.6 Amps/8.6
• Motor: Lincoln 5 HP
• Blade Width: 3/4"
• Wheel Size: 24 1/2"
• Saw Height: 80"
• RPM: 1740
• Throat Depth: 24"
• Work Light
• Height Under Guide: 11 1/2"
• Work Table Height: 40 3/4"
• Approx. MFG Date: 1977
• Approx. New List Price: $7,000.00
• Location: CPM Warehouse

Return to TOP

Used Dewalt 14" Chop Saw

Price - $75.00

Item # 1385

• Manufacturer: Dewalt
• Blade Diameter: 14"
• Electrics: 110 V
• Abrasive Blade
• Dimensions: 21" L X 5" W X 15" H
• Approx. Weight: 35 LBS.
• Approx. New List Price: $200.00
• Location: CPM Warehouse

Return to TOP

Used Stanley Sheet Metal Unishear - Model .01

PRICE - $300.00

Item # 1343

• Model: .01 - 90212 Unishear
• Capacity: 12 Gauge
• Electrics: 115 Volts AC/DC, 6.6 Amps
• Dimensions: 15" x 7" x 1/2" tall
• Approx. Weight: 15 LBS.
• Approx. New List Price: $1,100.00
• Location: CPM Warehouse

Return to TOP

Used 52" X 16Ga Tennsmith Hydraulic Sheet Metal Shearing Machine

PRICE - $4,000.00

Item # 1510

• Manufacturer: Tennsmith
• Model: 52H
• Capacity: 52" X 16 Ga Mild Steel
• Electrics: 230V/3 PH
• 3 HP Motor
• Graduated Side Gauges
• Bevel Gauge
• 1 Front Sheet Support Arm
• Manual Backgauge - 30"
• Operating Instructions & Parts List Included
• Weight: 1,100 LBS.
• Dimensions: 63"L x 31"W x 49"H
• Approx. New List Price: $7,000.00
• Location: CPM Warehouse

Return to TOP

Used 52" X 16Ga Tennsmith Hydraulic Sheet Metal Shearing Machine

PRICE - $4,000.00

Item # 1511

• Manufacturer: Tennsmith
• Model: 52H
• Capacity: 52" X 16 Ga Mild Steel
• Electrics: 230V/3 PH
• 3 HP Motor
• Graduated Side Gauges
• Bevel Gauge
• 2 Front Sheet Support Arms W/ Stop
• Manual Backgauge - 30"
• Operating Instructions & Parts List Included
• Weight: 1,100 LBS.
• Dimensions: 63"L x 31"W x 49"H
• Approx. New List Price: $7,000.00
• Location: CPM Warehouse

Return to TOP

We Currently Do Not Have Any Used Sheet Metal Slitters. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Sheet Metal Slitter.

Return to TOP

We Currently Do Not Have Any Used Spiral Machines. Please Check Back Or Contact Us
And Our Sales Staff Can Assist You In Finding A Used Spiral Machine.

Return to TOP

Used Chicago Hand Held Spot Welder on Stand w/ Floor Pedal

Price - $350.00

Item # 1542

• Manufacturer: Chicago, Miller Stand
• Electrics: 230V / 1PH
• Capacities: 1.5 KVA & 6" Arms/Tongs
• Foot Pedal
• Miller Stand
• Standard Tips
• Works w/ Uncoated Mild Steel, Galvanized, or Stainless Steel
• Sheet Metal Spot Welding
• Air Cooled
• Dimensions: 13" X 6" X 4.5"
• Approx. New List Price: $700.00
• Location: CPM Warehouse

Return to Top