Used Machinery

ALL Used Machinery

Used Air Compressors

Used Autobrakes / Sheet Metal Folders

Used Bar Folders

Used Sheet Metal Brakes

Used Cheek Benders

Used Cleat Benders / Cleat Folders

Used Clincher / Fasteners

Used Coil Lines

Used Corner Inserter Machines

Used Crimping / Beading / Rotary Machine

Used Drill Press

Used Duct Beading Machine

Used Duct Insulation Liner Cutters

Used Flangers / Flanging Machines

Used Gorelockers / Elbow Machines

Used Grinders

Used HVAC Accessories

Used HVAC Duct Insulation Pin Spotters

Used Ironworkers

Used Laser Cutting Machines

Used Notching Machines

Used Pipe Equipment

Used Pittsburgh Seamers

Used Plasma Cutting Machines

Used Press Brakes

Used Punching Machines

Used Sheet Metal Rolls

Used Roll Formers

Used Saws

Used Sheet Metal Shears

Used Sheet Metal Slitters

Used Spiral Machines

Used Welders

New Machinery | Clinching/ Fastening | Norlok | Surelok II 12 24V HS

Surelok II 12 24V HS

 

Manufacturer:

Condition: New

Description: Introducing our newest floor mounted machine which is designed for the HVAC fitting industry. Especially for large volume fitting manufacturers that require a faster clinching machine. Surelok II 12 24v HS features an electronic option (that can be turned on or off) to increase the speed of the machine while maintaining Norlok’s trusted safety features.

• Trusted Norlok WAMP Pneumatic Power Unit
• 12" Throat frame clinches from 32 gauge to 14 gauge mild steel
• Intelligent Safety Stroke now with with adjustable “Anti Fatigue” 400ms to 3sec Auto Cycle
• Fastest OSHA safe clinching in the world – 2.5 clinches per second

View Machine Brochure Here

 

 

Standard Features:

• Press Design: Solid 3” (76mm) steel “C” frame. Rigid steel frame = longer tool life
• Features: WAMP pneumatic power unit. Regulator, Shut-off valve Foot pedal operated
• Stroke: 1" (25.4mm) max. (adjustable) “Intelligent” safety stroke for greater operator safety.
• Throat: 12" (305mm)
• Work Height: 45" (1143mm)
• Upper Tooling: Round only Close tooling access allows for more applications. Simple adjustments to suit material thickness.
• Lower Tooling: Die insert on a hardened die plate with a hardened protection collar.
• Capacity: MAX: 2 ply .075” (1.9mm) mild steel. MIN: 2 ply .010” (.25mm) mild steel.
• Cycle speed: 150 cycles/minute @ 3/8" stroke
• Power Requirements: 90 to120psi (6.1 – 8.1 Bar) 100psi (6.8 Bar) (recommended) Approx .5 cuft (.014cu m) free air/cycle 5HP (3.75kW) @ 60 clinches per min. 115/230 VAC 50/60 Hz .46/.26 Amps
• Weight: 852 lb (387 kg)

 

Return to the New Clinching/ Fastening Page

Return to the Home Page