CINCINNATI Precision Machinery - sheet metal fabrication machinery specialists...we are here to serve you for all of your sheet metal fabricating machinery Here at CPM we represent machinery for all of your sheet metal fabrication needs - everything from hand tools to lasers, coilines to brakes, notchers to ironworkers and much more. Please give us a call or glance through CINCINNATI Precision Machinery 's site for all your sheet metal fabrication needs.

youtube logo

Used Machinery

ALL Used Machinery

Used Air Compressors

Used Autobrakes / Sheet Metal Folders

Used Bar Folders

Used Sheet Metal Brakes

Used Cheek Benders

Used Cleat Benders / Cleat Folders

Used Clincher / Fasteners

Used Coil Lines

Used Crimping / Beading / Rotary Machine

Used Drill Press

Used Duct Beading Machine

Used Duct Insulation Liner Cutters

Used Flangers / Flanging Machines

Used Gorelockers / Elbow Machines

Used Grinders

Used HVAC Accessories

Used HVAC Duct Insulation Pin Spotters

Used Ironworkers

Used Laser Cutting Machines

Used Mechanical Piping Equipment

Used Notching Machines

Used Plasma Cutting Machines

Used Press Brakes

Used Punching Machines

Used Sheet Metal Rolls

Used Roll Formers

Used Saws

Used Sheet Metal Shears

Used Sheet Metal Slitters

Used Spiral Machines

Used Welders



Tin Knocker Cleat BenderS

Tin Knocker TK No. 30 Cleat Bender

The TK 30 inch cleat former quickly forms uniform drive cleat edges on rectangular duct with no required set up or adjustment. The upper handle forms the cleat and the lower handle opens the work space for easy removal of the metal. This machine is made of heavy cast iron and steel fabrication.

*Shown With Optional Stand

Capacity: 20 Ga Mild Steel (1.0mm)
Bend Length: 30" (762mm)
Cleat Depth: .500" (12.7mm)
Dimensions: Approx. 42"x16"x20"
Weight: 126 lbs. (57kg)

Return to TOP


Tin Knocker TK No. 30 Power Cleat Bender

The Cleat Bender is another Tin Knocker model designed to increase speed and efficiency in the sheet metal shop. It performs cleat bending operations with precision, safety and ease of performance, yet it only requires one man for operation – even on long or clumsy duct components. No holding, supporting or repositioning of metal pieces is required in cleat forming operations. Solves problems for cleat duct work requiring insulation. Can perform cleat bending operations in the flat when you are producing “L” shaped insulated duct

Maximum Capacity 22-gauge mild steel or equivalent
Table top height or working surface height 31 inches
Table top length not including CLEAT BENDER 36 inches
Overall length 49 inches
Maximum width capacity 30 inches
1 HP Motor for 110 Volt, single phase 60 HZ
Approximate shipping weight 650 Lbs.

Return to TOP



Return to the Tin Knocker Machinery Page

Return to the New Machinery Page

Return to the Home Page

cincinnati precision machinery